Fujitsu ETERNUS DX100 S3 - Thin Provisioning Management

Appendix B Factory Default List
B.5 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1006
B.5 Thin Provisioning Management
This section provides information on the default parameters of the following actions for Thin Provisioning
management.
• Set Thin Provisioning
• Create Thin Provisioning Pool
• Rename Thin Provisioning Pool
• Expand Thin Provisioning Pool
• Modify Threshold Thin Provisioning Pool
• Modify Cache Parameters (Thin Provisioning Pool)
• Assign Eco-mode Schedule (Thin Provisioning Pool)
■ Set Thin Provisioning
■ Create Thin Provisioning Pool
Screen Setting item Default value
Thin Provisioning Settings Thin Provisioning Disable
Maximum Pool Capacity
• For the ETERNUS DX60 S3/DX100 S3/DX200 S3
32 TB
• For the ETERNUS DX500 S3
64 TB
• For the ETERNUS DX600 S3
128 TB
• For the ETERNUS DX8700 S3/DX8900 S3
256 TB
• For the ETERNUS DX200F
32 TB
Screen Setting item Default value
New Thin Provisioning Pool Create Mode Automatic
Automatic Setting Drive Type Online (*1)
RAID Level Striping (RAID0)
Select Drives Minimize number of using drives
Encryption by CM Off
Alarm
Warning 90 (%)
Attention 70 (%)