Fujitsu ETERNUS DX100 S3 - Page 1008

Appendix B Factory Default List
B.5 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1008
■ Modify Cache Parameters (Thin Provisioning Pool)
■ Assign Eco-mode Schedule (Thin Provisioning Pool)
Screen Setting item Default value
Parameters Setting Multi Writeback Count (MWC) Refer to "Allowed input for MWC when using the
default Stripe Depth value (TPP)" (page 1068) in
"F.2.1 Allowed Input for MWC When Using the
Default Stripe Depth Value" and "Allowed Input for
MWC when the Stripe Depth value is tuned (TPP)"
(page 1069) in "F.2.2 Allowed Input for MWC
When the Stripe Depth Value is Tuned" for details.
Screen Setting item Default value
Eco-mode Schedule Settings Eco-mode Action
• When no Eco-mode schedules are registered
Drive always on
• When Eco-mode schedules are registered
Do not change