Fujitsu ETERNUS DX100 S3 - Format REC Disk Buffer

Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
655
2 Click the [OK] button.
 Deletion of an REC Disk Buffer starts.
3 Click the [Done] button to return to the [REC Disk Buffer] screen.
End of procedure
7.8.10 Format REC Disk Buffer
This function formats an REC Disk Buffer.
The procedure to format an REC Disk Buffer is as follows:
Procedure
1 Select the REC Disk Buffers to be formatted (multiple selections can be made), and click the
[Format REC Disk Buffer] button in [Action].
 A confirmation screen appears.
• If an in-use REC Disk Buffer is formatted, the data stored in the REC Disk Buffer will be deleted.
• The following REC Disk Buffers cannot be formatted:
- The status is other than " Available" or " Readying"
- The REC Disk Buffer is blocked
The newly created REC Disk Buffer will be formatted automatically. In this case, it is not necessary to format
the REC Disk Buffer by using this function.
If an in-use REC Disk Buffer is formatted, the data stored in the REC Disk Buffer will be deleted.