Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
438
4.3.5 Delete CA Port Group
This function deletes a CA port group.
The procedure to delete a CA port group is as follows:
1 Select the CA port group to be deleted (multiple selections can be made) and click [Delete
Port Group] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
Deletion of the CA port group starts.
3 Click the [Done] button to return to the [CA Port Group] screen.
4.3.6 Modify CA Port Group
This function performs the following modifications for existing CA port groups:
• CA Port Group Name
• Port (Add and delete member ports in a CA port group)
Ports can be added to CA port groups for which the host affinity setting is already configured and ports can
also be deleted from CA port groups.
If a port has been added, the host affinity setting is automatically configured to the corresponding port as a
CA port group member.
If a port has been deleted, the host affinity setting is cleared from the corresponding port.
CA port groups that are being used for the host affinity settings cannot be deleted.
The CA port group, of which host affinity settings have been configured (the status of the port group is
"Active"), cannot be deleted.
To Next Page
Loading...
