Fujitsu ETERNUS DX100 S3 - Start Snapshot

Chapter 3 Volume Management
3.19 Snapshot Management for NAS Volumes
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
333
3.19.3 Start Snapshot
This function restarts the Snapshot acquisition.
This function is displayed in a Unified Storage environment.
The procedure to restart the Snapshot acquisition is as follows:
Procedure
1 Select which NAS user volumes to start Snapshot for (multiple selections can be made) and
click [Start Snapshot] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 The Snapshot starts.
3 Click the [Done] button to return to the [Snapshot] screen.
End of procedure
To acquire the Snapshot again after deleting the Snapshot settings, registration of the Snapshot
configuration information is required. Refer to "3.19.1 Set Snapshot" (page 327)
for details.