Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
765
A.1.12.2 Update Customer Information
For details about this function, refer to "1.13.3 Update Customer Information" (page 196).
● Information File
• Customer Information File
■ Customer Information
● Detailed Settings
• Checkbox
• Company Name (required)
• Department/Division
Description Import the "Customer Information File", which was created using the REMCS ESAT, to the
ETERNUS DX.
Click the [Browse...] button to specify the "Customer Information File", or directly input
the path to the "Customer Information File".
Input condition/
Display contents
• Click the [Browse...] button to specify the "Customer Information File"
• Directly input the path to the "Customer Information File"
When importing customer information to the ETERNUS DX all at once, click the [Browse...] button to specify the
location where the customer information file has been stored, and click the [Import] button.
Description If the "Delete any Customer Identity information from the storage system after the
information is sent to the 'REMCS Center'." checkbox is selected, customer information
saved on the ETERNUS DX is deleted after transmitting the information to the REMCS
center.
Input condition/
Display contents
"Delete any Customer Identity information from the storage system after the information
is sent to the 'REMCS Center'." checkbox
• Selected
• Cleared
Description Input the company name that owns the ETERNUS DX.
Input condition/
Display contents
Up to 60 alphanumeric characters and symbols
Description Input the department or division that owns the ETERNUS DX.
Input condition/
Display contents
Up to 40 alphanumeric characters and symbols
To Next Page
Loading...
