Fujitsu ETERNUS DX100 S3 - Delete Fc;Fcoe Host

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
420
4 Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure
4.2.12 Delete FC/FCoE Host
This function deletes an FC/FCoE host.
When an FC/FCoE host belongs to a host group, the FC/FCoE host can be deleted, irrespective of its host affinity
settings.
The procedure to delete an FC host is as follows:
Procedure
1 Select the FC host to be deleted (multiple selections can be made) and click [Delete FC/FCoE
Host] in [Action].
 A confirmation screen appears.
Click the [Continue] button to continue registering SAS hosts.
• Not all of the hosts can be deleted from a host group.
• When an FC host does not belong to a host group, the FC host, of which host affinity settings have been
configured, cannot de deleted.
• When a host in the host group for which the host affinity settings are already configured is deleted, the
path from the host to the port is also deleted.
• The "FCoE" host interface is regarded as "FC". Both "FC host" and "FCoE host" are abbreviated as "FC host" in
this section.
If an error screen appears under the following conditions, check the parameter settings.
• The selected FC host is the last host in a host group
• The selected FC host does not belong to any host group and the host affinity setting has been
configured for the target FC host