EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Add SAS Host Group

Fujitsu ETERNUS DX100 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
379
(2)Replacement of "0000" blocks with "0".
(3)Replacement of a block with consecutive zeros by "::" is performed only once.
(Replacement of a block with consecutive zeros by "::" is allowed only once.)
4.2.3 Add SAS Host Group
This function creates a new SAS host group and registers which hosts are members of this group.
A SAS host group uses SAS as the interface type, and groups the hosts (HBAs), which access the same LUN
group. The Host Affinity is specified for each SAS host group.
The number of host groups and hosts that can be registered
*1: The total number of host groups irrespective of the interface types.
*2: The total number of hosts irrespective of the interface types.
The following IP addresses cannot be specified:
Link local addresses (the address starts with "fe80::") for which all of the values for the low 64-bit are "0"
Connect IP addresses (*1) for which the first 3-bit are not "001" or the first 7-bit are not "1111110"
*1: The connect IP address indicates either a "global address", "unique local address", or "6to4 address".
The first 64-bit of the gateway is "fe80::" and all of the values for low 64-bit are "0"
Network addresses for which the first 3-bit of the gateway are "001"
Network addresses for which the first 7-bit of the gateway are "1111110"
DNS server IP addresses for which the first 3-bit are not "001" or the first 7-bit are not "1111110"
2001:1000:120:0000:0000:123:0000:0000
2001:1000:120:0:0:123:0:0
[Example]
2001:1000:120:0:0:123:0:0
2001:1000:120::123:0:0 is OK
2001:1000:120::123:: is not allowed
(Replacement of a block with consecutive zeros by "::" is allowed only once.)
[Example]
Model Number of host
groups (*1) per
storage system
Number of hosts
(HBAs) (*2) per
storage system
Number of hosts
(HBAs)
per CA port
Number of hosts
(HBAs)
per host group
ETERNUS DX60 S3
512
128 32
8ETERNUS DX100 S3
1024 256
ETERNUS DX200 S3

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals