Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
378
(6) After adding the iSCSI host is complete, click the [Add] button.
A confirmation screen appears.
4 Click the [OK] button.
Registration of the iSCSI host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
■ IPv6 Address Notation
Since the IPv6 address is 128-bit and extremely long, this address is displayed using "xxxx", which describes
16-bit in hexadecimals as being one block that is separated by colons (":").
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
• Use 0 - ffff (FFFF) (hexadecimal, alphanumeric characters) for inputting an IPv6 address.
• The current setting is displayed with 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
• Up to 128-bit
• The first 64-bit (prefix) of the link local address is fixed to "fe80::"
The following three abbreviation methods are available for IPv6 addresses:
(1) Omission of the first "0" of a block that follows consecutive zeros.
Click the [Continue] button to continue registering iSCSI host groups.
2001:1000:0120:0000:0000:0123:0000:0000
2001:1000:120:0000:0000:123:0000:0000
[Example]
To Next Page
Loading...
