Fujitsu ETERNUS DX100 S3 - Page 93

Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
93
For details on the parameters for this function, refer to "A.1.6.3 Add Role" (page 700).
For the factory default settings for this function, refer to "Appendix B Add Role" (page 977)
.
The procedure to add a user role is as follows:
Procedure
1 Click [Add Role] in [Action].
Storage Management Configuration setting functions of the ETERNUS DX (date and time, network,
remote support), etc.
User Management User account setting functions (create/change/delete), etc.
Authentication / Role External authentication and role setting functions (create/change/delete),
etc.
Security Setting Encryption setting functions of drives, etc.
Maintenance Information Exporting and deleting functions of maintenance information (performance
information, configuration information, events, storage system logs, panic
dumps), etc.
Firmware Management Firmware management functions (for users without the "Maintenance Oper-
ation" policy who need to set the controller firmware)
Maintenance Operation Maintenance operation/preventive maintenance operation of hardware and
firmware
A role without any user policies cannot be created.
• The ETERNUS DX has default roles. Refer to "Default Role" (page 1014) for details.
• Multiple policies can be allocated to one role.
• A role that is created can be allocated to a user account by using the procedure in "1.7.1 Setup User
Account" (page 84).
Policies Description