Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
700
• Retry Out Time
A.1.6.3 Add Role
For details about this function, refer to "1.7.4 Add Role" (page 92).
For the factory default settings for this function, refer to "Appendix B Add Role" (page 977)
.
● Role Setting
• Name
Description Select the total time (seconds) for waiting for a response from the RADIUS server.
The ETERNUS DX retries authentication during the specified time (seconds), and if there
is no response in the specific time, regards the situation as a network error.
Input condition/
Display contents
• 10
• 20
• 30
• 40
• 50
• 60
Description Input a role name.
The role name, which has previously been used (including the default role name),
cannot be used.
Input condition/
Display contents
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
To Next Page
Loading...
