Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
699
● Primary Server (required) / Secondary Server
• Domain Name / IP Address
• Port No.
• LAN Port
• Authentication Mode
• Shared Secret
Description Input the domain name or the IP address of the RADIUS server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
for details. When the
current setting is displayed, the IPv6 address is displayed as an abbreviation.
Input condition/
Display contents
• For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• For domain name
Up to 63 alphanumeric characters and symbols
Description Input the port number that is used for RADIUS Authentication.
Input condition/
Display contents
• Numeric characters
• 1 - 65535
Description Input the LAN port number that is used for RADIUS Authentication.
Input condition/
Display contents
• MNT
• RMT
Description Select the authentication mode for RADIUS Authentication.
Input condition/
Display contents
• CHAP
• PAP
Description Input the same Shared Secret as the RADIUS server.
Input condition/
Display contents
Up to 64 alphanumeric characters and symbols
To Next Page
Loading...
