Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
94
2 Input the role name and select the policies for the role.
The main setting items are as follows.
● Role Setting
• Name
● Target Policy
• Policies
3 Click the [Create] button.
A confirmation screen appears.
4 Click the [OK] button.
Application of the role settings starts.
5 Click the [Done] button to return to the [Define Role] screen.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" does not satisfy the input conditions
• The "Name" has already been used
To Next Page
Loading...
