Appendix B Factory Default List
B.2 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
989
*1: The default value varies depending on the RAID groups registered in the ETERNUS DX.
■ Rename Volume
■ Modify Thin Provisioning Volume Threshold
■ Set Allocation
■ Start RAID Migration
Manual Setting (When
creating WSV type volumes)
Select RAID Group Information
Drive Type Online (*1)
RAID Level High Performance (RAID1+0) (*1)
Number of Member Drives 4 (*1)
Stripe Depth 64KB
Screen Setting item Default value
Screen Setting item Default value
Rename Setting Start of Suffix 0
Screen Setting item Default value
Threshold Settings New Threshold 80 (%)
Screen Setting item Default value
Allocation Settings Allocation Thin
Screen Setting item Default value
Setting Volume Migration Destination RAID Group / Thin Provisioning Pool / Flexible Tier
Pool
Volume Capacity Migration source volume size
FTSP Priority Automatic
Encryption Encryption status of the migration source volume
Allocation Thin
Start Optimizing TPV/FTV
Capacity after migration
Disable
Data Integrity Data protection method of the migration source
volume
Select Migration Destination Select Migration Destination Cleared
To Next Page
Loading...
