Fujitsu Storage ETERNUS AF650 S2 - Components (Front)

1.2.3 Components (Front)
This section describes the operation panel and the drives in the front of the drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 1.14 shows the operation panel. Table 1.6 shows the status and meanings of each LED.
Figure 1.14 Operation Panel (Drive Enclosure)
2
1
3
4
1. DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.6 Status and Meanings of Each LED (Operation Panel (Drive Enclosure))
LED name LED status Meanings
IDENTIFY
(blinks blue)
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
FAULT
(amber)
The drive enclosure is in error status.
POWER
(green)
DC power is supplied to the drive enclosure.
Chapter 1 Component Names and LED Names
1.2 Drive Enclosures
22
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays
Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0