Fujitsu Storage ETERNUS AF650 S2 - 3.3 Displaying Status via ETERNUS CLI

Status of the ETERNUS AF is monitored periodically, and the result is displayed as a general status icon with
character strings.
Table 3.1 General Status of ETERNUS Web GUI
Status Description
(green)
The ETERNUS AF is in a normal state.
(red)
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
(red)
The ETERNUS AF is in error state.
(orange)
The ETERNUS AF is under maintenance.
(yellow)
The ETERNUS AF is in warning state.
For details, refer to "Configuration Guide (Web GUI)".
3.3 Displaying Status via ETERNUS CLI
The status of the ETERNUS AF and the usage status of RAID groups, TPPs, and SDPs can be checked by send-
ing the status display command via ETERNUS CLI.
CLI> show status
Summary Status [Normal]
CLI> show status
Summary Status [Error]
CLI> show status
Summary Status [Warning]
The general status of the ETERNUS AF indicates whether an error status component or a warning status com-
ponent exists in the storage system.
Table 3.2 General Status of ETERNUS CLI
Status Description
Empty An undefined or uninstalled component exists in the ETERNUS AF.
Normal The ETERNUS AF is in a normal state.
Pinned Data Pinned data exists in the ETERNUS AF.
Unused An undefined component is installed in the ETERNUS AF.
Warning The ETERNUS AF contains a component that requires preventive maintenance.
Maintenance The ETERNUS AF is under maintenance.
Error An error has occurred in a component that is installed in the ETERNUS AF.
Loop Down The ETERNUS AF is in the BackEnd Down state.
Not Ready An abnormality is detected and access from the host cannot be received.
Subsystem Down The ETERNUS AF cannot be used.
Change Assigned CM CM hot expansion recovery is required.
Chapter 3 Storage System Monitoring
3.3 Displaying Status via ETERNUS CLI
43
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays
Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0