Fujitsu Storage ETERNUS AF650 S2 - Figure 1.15 Drives

■
Drives
Figure 1.15 shows the drive. Figure 1.16 shows the slot number of each drive.
Table 1.7 shows the status and meanings of each LED.
Figure 1.15 Drives
12
1. DRIVE READY LED
2. DRIVE FAULT LED
Figure 1.16 Drive Slot Numbers (Drive Enclosure)
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.7 Status and Meanings of Each LED (Drive)
LED name LED status Meanings
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
•
The drive is in error status.
•
The LED light up operation was performed from the ETERNUS
CLI command line in order to identify the drive location.
Chapter 1 Component Names and LED Names
1.2 Drive Enclosures
23
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays
Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0