Fujitsu Storage ETERNUS AF650 S2 - 1.4 Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)

1.4 Power Distribution Units (for Regions other than the EMEIA,
Central American, and Caribbean Regions)
There are two sizes for power distribution units: 1U and 2U.
1.4.1 Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
Figure 1.21
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
3
2
1
1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
3. Inlet (INPUT)
This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC
input cable).
Chapter 1 Component Names and LED Names
1.4 Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)
28
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays
Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0