Important Information on Handling
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
11
Power Cable and Power Plug
• If there is a lightning storm, disconnect the power plug of the LT20 S2/LT40 S2/LT60 S2 from the outlet.
Using the LT20 S2/LT40 S2/LT60 S2 or leaving it plugged in during a lightning storm may damage the LT20
S2/LT40 S2/LT60 S2 or cause a fire.
• Do not apply voltage of a value that is not specified. Do not insert too many plugs into a single outlet.
Doing so may cause a fire or electric shock.
• To prevent electric shock, do not handle a power plug or disconnect a power plug with wet hands.
• Do not damage or modify the power cable. The power cable may be damaged by placing heavy objects on
it, or by pulling, forcibly bending, twisting or heating it, which could cause a fire or electric shock.
• If the power cable or power plug is damaged or the plug does not securely fit in the outlet slot, do not use
the cable. Continued use of the cable when it is damaged or when the plug does not securely fit in an
outlet could cause a fire and/or electric shock.
• If there is a build-up of dust on the prongs of the power cable or the outlet slots, use a dry cloth to wipe the
prongs and/or outlet slots clean. Continued use of cables or outlet slots with a build-up of dust could cause
a fire.
• If the LT20 S2/LT40 S2/LT60 S2 requires grounding, be sure to ground such unit, before turning the power
on. If an electric leak occurs, it could lead to fire or electric shock.
If, for some reason, it is not possible to ground the LT20 S2/LT40 S2/LT60 S2, consult your sales
representative or a Fujitsu maintenance service center.
• Securely plug in the power plug so that it goes far enough into the outlet. A loose power plug may cause a
fire or failure of the LT20 S2/LT40 S2/LT60 S2.
• If the LT20 S2/LT40 S2/LT60 S2 is to be moved, ensure that the power plug is disconnected from the outlet
before moving it. Otherwise, the cables may be damaged, which may lead to a fire and/or electric shock.
• If the LT20 S2/LT40 S2/LT60 S2 is to be moved, before moving it, ensure that all connected cables have
been disconnected. Otherwise, the cables may be entangled, which may lead to cause the LT20 S2/LT40
S2/LT60 S2 to drop or fall over, resulting in injury. Watch your footing during the move.
• When the LT20 S2/LT40 S2/LT60 S2 is not used for a long period of time, to ensure safety, be sure to
disconnect the power cable of the LT20 S2/LT40 S2/LT60 S2 from the outlet. Failure to do so may cause a
fire and/or electric shock.
• When removing a power plug from the outlet, do not yank on the power cable. Be sure to grasp the plug
and not the cable. Yanking on the power cable may cause the core of the power cable to be exposed or
broken, causing a fire and/or electric shock.
To Next Page
Loading...
