What to do if the error 'Import Export functionality is only available using secure HTTPS connection' appears on Fujitsu Storage?
This error appears when you log in using an HTTP connection instead of HTTPS. To resolve this, enable SSL (Secure Socket Layer) by selecting the checkbox on the [Configuration > Web Management] screen. Then, log out and log back in using HTTPS.
Why does the message 'Encryption configuration changes cannot be made while media is loaded in any drive' appear on my Fujitsu ETERNUS LT260?
This message appears because a tape cartridge is currently loaded in the tape drive. To fix this, move the tape cartridge from the tape drive to the slot.
What to do if I get an error message when logging in to Fujitsu Storage with the security account?
This error message appears because the initial password for the security account hasn't been changed. To fix this, use the operator panel to change the initial password of the security administrator account.
Why did the encryption fail on my Fujitsu Storage?
Encryption may have failed for several reasons: 1. The data might not have been recorded with an Ultrium5 or later tape drive. 2. An Ultrium3 or earlier data cartridge might have been used. 3. The encryption settings may not be correct. To solve this, confirm the following: 1. The data was recorded with an Ultrium5 or later tape drive. 2. No Ultrium1, Ultrium2, or Ultrium3 data cartridge was used. 3. The correct encryption settings have been configured.
How to display the [Configuration > Encryption > LT Encryption] screen on Fujitsu ETERNUS LT260 Storage?
This issue occurs because you are logged in with an account other than the security account. To resolve this, log in using the security account.
What does it mean if the message 'Partition contains drives which do not support Encryption' appears on Fujitsu ETERNUS LT260?
This message indicates that the drive firmware version might be outdated. To resolve this, update the drive firmware to the latest version. Contact a maintenance engineer to perform the update.
Why can't I export an encryption key on my Fujitsu Storage?
The encryption key has not been assigned to a data cartridge. An encryption key is generated and assigned when a data write process is performed to the data cartridge.
General| Model | ETERNUS LT260 |
|---|---|
| Type | Tape Library |
| Number of Slots | 24 |
| Number of Drives | 2 |
| Drive Type | LTO Ultrium |
| Interface | SAS |
| Form Factor | Rack-mountable |
Outlines the manual's structure, consisting of two chapters on Overview and Operation.
Explains symbols used for warnings and cautions to prevent injury or damage.
Describes the library's two main interfaces: operator panel and remote panel.
Explains the main screen layout into top banner, left pane, and center pane.
Details using the operator panel and remote panel for library operations.
Covers essential configuration settings like initial setup, date/time, network, and security.
Covers procedures for maintaining the library, including tests, logs, and firmware.
Covers operations for moving media, opening slots, and cleaning drives.
Provides information on library, module, drive, network, and security status.
To Next Page
