Fujitsu ETERNUS LT260 - Figure 2.25 Position Test

Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
51
Figure 2.25 Position test
■ To run the position test
Procedure
1 Navigate to the Maintenance > Library Tests > Position Test screen.
2 Select a cell from the Source Elements list.
To select from a subset of the cell:
a Click Filter On.
b Enter characters into the search box and then click Search.
The Source Elements list is updated to only include cartridges with a barcode label including the
search characters.