Fujitsu ETERNUS LT260 - Viewing Log Files; Figure 2.29 View Logs

Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
54
2.6.2 Viewing Log Files
● Operate from the operator panel
To view the library log files, navigate to the Maintenance > View Logs screen and then select one of the
logs.
● Operate from the remote panel
To view the library log files, navigate to the Maintenance > Logs and Traces > View Logs screen and then
select one of the logs.
The available logs are:
• Event Ticket Log
Records library error and warning events.
• Information Log
Records library information warnings.
• Configuration Log
Records configuration changes.
If [Close all open tickets] is clicked, all the logs that are being displayed become hidden.
After the [Include closed tickets] checkbox is selected, the logs that were hidden by clicking [Close Ticket] or
[Close all open tickets] are also displayed.
Figure 2.29 View logs
The log entries are displayed in order of most recent to oldest. The log entries contain a date and time code,
event code, severity, component identifier and event details.
The format for the date and time is:
DD.MM.YYYY HH.MM.SS
Do not click [Clear log]. If [Clear log] is clicked, all the required information for a maintenance is cleared.