Chapter 1 Overview
1.1 Overview of Panel Operations
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
14
1.1.2 Overview of the Remote Panel
The remote panel can be used to perform operations such as referencing/setting the library and drive status
and performing drive cleaning on a Web browser via the LAN.
Before using the remote panel, network settings need to be performed on the operator panel to enable the IP
address, the subnet mask, and the gateway so that the remote panel can be used. Specify the following URL
on a Web browser after performing the settings:
or
The following window is displayed when the LT260 is connected.
Figure 1.3 Remote panel starting window
• The recommended environment for the remote panel is as follows:
- Web browser
Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, Safari
• Cookies and Java Script are used for the remote panel. Cookies and Java Script need to be enabled in your
browser.
http:// <IP address specified for the LT260>/
https:// <IP address specified for the LT260>/
Use the https URL to connect to the remote panel for the LT260 when SSL is enabled. See "2.5.16 Enabling
SSL or SSH" (page 47) for the detail.
To Next Page
Loading...
