Fujitsu ETERNUS LT260 - Figure 2.31 Upgrades System Firmware; Managing System Firmware

Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
56
2.6.3 Managing System Firmware
The firmware version currently installed on the library is displayed in the library status area on the Home
page. You update the library firmware from the Maintenance > Software Upgrades > System Firmware screen.
Figure 2.31 Upgrades system firmware
To update library firmware from the remote panel, click Browse and select the firmware file from the local
computer.
■ To update the library firmware from the operator panel
Procedure
1 Copy the firmware file to the USB thumb drive.
2 Insert the USB thumb drive into the USB port on the front of the library.
The library detects the USB thumb drive.
3 Select the firmware file.
4 Click Start Upgrade.
End of procedure
When you update the library firmware, the library will update the firmware of the expansion modules to a
compatible version.