Fujitsu ETERNUS LT260 - Configuring the RMI Timeout Setting; Figure 2.12 RMI Timeout

Chapter 2 Operating the Library
2.5 Configuring the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
32
2.5.7 Configuring the RMI Timeout Setting
To set the timeout for the remote panel and operator panel, navigate to the System > RMI Timeout screen.
Procedure
1 Select timeout value (5 or 30 Minutes).
2 Click Submit.
Figure 2.12 RMI timeout
End of procedure