Fujitsu ETERNUS LT260 - Figure 2.33 Download Drive Logs; Downloading Drive Logs

Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
58
2.6.5 Downloading Drive Logs
From the Maintenance > Download Drive Logs screen, logs can be downloaded from any tape drive.
Figure 2.33 Download drive logs
Procedure
1 Select a tape drive to download the log.
The following items are displayed in the list of drive logs.
• Drive
The drive number. Drives are numbered starting with one from the physical bottom of the library to
the top.
• Type
The drive form factor (half height) and interface
• Firmware
The current drive firmware version
• Serial
The drive serial number
• Unit
The module containing the tape drive
• Partition
The logical library (or partition) associated with the tape drive
2 Select a log to download.
• Current Log (*1)
Creates and saves a new log from the drive.
• Log From Last Unload (*1)
Saves the log that was automatically created after the last cartridge was unloaded from the drive.