Fujitsu ETERNUS LT20 S2 - NetVault 11.2+ WebUI Configuration

Chapter 4 Setting the Backup Software
4.5 NetVault
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
61
- When WebUI is used with NetVault Backup 11.2 or later
To use the cleaning function for NetVault Backup 11.2 or later, perform the following settings with the
WebUI.
Procedure
1 In the WebUI menu, click [Manage Devices] to open the [Manage Devices] page.
2 Select [Tree View] to switch the view to the tree view mode.
Click the name of the drive and select [Configure] from the menu that appears.