EasyManua.ls Logo

Fujitsu MHT2020AT - Environmental Specifications

Fujitsu MHT2020AT
256 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Overview
1-8 C141-E192-01EN
Figure 1.2 Current fluctuation (Typ.) at +5 V when power is turned on
(6) Power on/off sequence
The voltage detector circuits (the MHT Series) monitor +5 V. The circuits do not
allow a write signal if either voltage is abnormal. These prevent data from being
destroyed and eliminates the need to be concerned with the power on/off
sequence.
1.4 Environmental Specifications
Table 1.4 lists the environmental specifications.
Table 1.4 Environmental specifications
Item Specification
Temperature
Operating
Non-operating
Thermal Gradient
5 °C to 55 °C (ambient)
5 °C to 60 °C (disk enclosure surface)
–40 °C to 65 °C
20 °C/h or less
Humidity
Operating
Non-operating
Maximum Wet Bulb
8 % to 90 % RH (Non-condensing)
5 % to 95 % RH (Non-condensing)
29 °C (Operating)
40 °C (Non-operating)
Altitude (relative to sea level)
Operating
Non-operating
–300 to 3,000 m
–300 to 12,000 m

Table of Contents

Related product manuals