5.3 Host Commands
C141-E192-01EN 5-71
At command completion (I-O registers setting contents)
1F7
H
(ST) Status information
1F6
H
(DH) x x x DV xx
1F5
H
(CH)
1F4
H
(CL)
1F3
H
(SN)
1F2
H
(SC)
1F1
H
(ER)
Key-failure prediction status (C2h/2Ch)
Key-failure prediction status (4Fh/F4h)
xx
xx
Error information
The attribute value information is 512-byte data; the format of this data is shown
the following Table 5.8. The host can access this data using the SMART Read
Attribute Values subcommand (FR register = D0h). The insurance failure
threshold value data is 512-byte data; the format of this data is shown the
following Table 5.9. The host can access this data using the SMART Read
Attribute Thresholds subcommand (FR register = D1h).
To Next Page
Loading...
