Fujitsu MHT2020AT - Page 182

Interface
5-108 C141-E192-01EN
Table 5.21 Command code and parameters (2 of 2)
Command name Error register (X’1F1’) Status register (X’1F7’)
ICRC UNC INDF ABRT TK0NF DRDY DWF ERR
SLEEP V V V V
CHECK POWER MODE V V V V
SMART V V V V V
SECURITY DISABLE PASSWORD V V V V
SECURITY ERASE PREPARE V V V V
SECURITY ERASE UNIT V V V V
SECURITY FREEZE LOCK V V V V
SECURITY SET PASSWORD V V V V
SECURITY UNLOCK V V V V
FLUSH CACHE V V V V V
DEVICE CONFIGURATION V V V V
READ NATIVE MAX ADDRESS
EXT *O
VVVV
SET MAX ADDRESS EXT *O V V V V V
FLUSH CACHE EXT *O V V V V V
WRITE DMA EXT *O V *2 V V V V V
READ DMA EXT *O V *2 V V V V V V
WRITE MULTIPLE EXT *O V V V V V
READ MULTIPLE EXT *O V V V V V V
WRITE SECTOR (S) EXT *O V V V V V
READ SECTOR (S) EXT *O V V V V V V
DOWNLOAD MICROCODE V V V V
Invalid command V V V V
V: Valid on this command
*1: See the command descriptions.
*2: Valid only for Ultra DMA command.
*O: Option (customizing)