Fujitsu MHT2020AT - Page 249

C141-E192-01EN IN-1
Index
A
active idle mode 6-7
active mode 6-7
alternating processing,
automatic 6-11
for defective sector 6-10
for defective sector 6-10
area, spare 6-9
assignment processing, alternate cylinder
6-10
automatic alternating processing 6-11
B
blower 4-3
C
caching operation 6-13, 6-19
command, sequential 6-16
command, target of caching 6-13
command that is target of caching 6-13,
6-19
D
data, target of caching 6-13
data buffer structure 6-12
data that is target of caching 6-13
data transfer,
multiword 5-131
PIO 5-130
Ultra DMA 5-132
defect processing 6-9
device pausing Ultra DMA data out burst
5-142
device response 6-2
to reset 6-2
device terminating Ultra DMA data
in burst 5-138, 5-144
out burst 5-144
E
enabling and disabling 6-20
F
fluctuation, current 1-7
full hit 6-17
H
hit, full 6-17
hit, partial 6-18
hit, sequential 6-16
host pausing Ultra DMA data in burst
5-137
host terminating Ultra DMA data
in burst 5-139
out burst 5-143
I
initiating, Ultra DMA data
in burst 5-132
out burst 5-140
initiating Ultra DMA data
in burst 5-132
out burst 5-140
invalidating, caching-target data 6-13
invalidating caching-target data 6-13
invalidation of cached data 6-19
L
low power idle mode 6-7
M
mean time, mean time between failures
miss, hit 6-15
miss-hit 6-15
mode, active 6-7
mode, active idle 6-7
mode, power save 6-7
mode, sleep 6-8
mode, standby 6-8
multiword data transfer 5-131
multiword DMA data transfer timing 5-131
O
operation 6-1
operation, caching 6-13
operation, read-ahead 6-12
P
partial hit 6-18
pausing, device Ultra DMA data out burst
5-142