PRIMEQUEST 2000 Series Design Guide
1.6 Features (5/7)
Hot Plug
A component that is stopped due to a failure can be replaced without stopping the
operation of the partition.
Original Dump Function
For details, refer to "3.3 Key Points for I/O Configuration Design".
This function collects system information when a problem occurs in the OS.
Cluster System
For details, refer to "3.4 Key Points for Cluster Configurations".
Partition redundancy that is based on an inter-cabinet cluster or an intra-cabinet cluster
is supported.
Boot Devices
The following boot types are supported:
•Internal HDD/SAS-SSD (RAID card)
•HDD/SAS-SSD installed in a JX40 S2 (RAID card)
•iSCSI-SAN boot
•FC-SAN boot
•FCoE boot
Copyright 2016-2017 FUJITSU LIMITED 24
To Next Page
Loading...
Need help?
General