ID card
You can pull out the ID card (see figure 8 on page 49) as far as it will go and
push it back in again.
The ID card contains various system information, such as the product name,
serial number, order number, MAC addresses and DNS name.
I/O indicators* (green)
– Lights up to indicate a network connection.
– Flashes to indicate an active network connection.
– Does not light up if there is no network connection.
* The three I/O fabrics of the server blade are:
– Fabric 1: onboard CNA controller
– Fabric 2: mezzanine card 1
– Fabric 3/4: mezzanine card 2
To Next Page
Loading...
