Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI SAS / SCSI RAID Controllers).
I Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the global market).
http://jp.fujitsu.com/platform/server/primergy/downloads/ (for the Japanese
market).
6.3.5 Configuring the onboard CNA controller
A CNA controller is integrated on the system board. You can configure the onboard
CNA controller either before or during installation with the ServerView Installation
Manager. Using the ServerView Installation Manager is recommended.
I The onboard CNA controller has its own configuration utility. Please refer
the onboard CNA controller manuals as follows:
http://cmw3wbq1.emulex.com/downloads/fujitsu-technology-solutions.html
(for the global market).
http://jp.fujitsu.com/platform/server/primergy/manual/ (for the Japanese
market).
6.3.6 Configuring the server and installing the operating
system with the ServerView Installation Manager
Using the ServerView Installation Manager on the ServerView Suite DVD
provided, you can conveniently configure the server and install the operating
system. This includes configuring the server-specific settings using the
ServerView Configuration Manager and configuring the RAID controller using
the ServerView RAID Manager.
Advantages of the ServerView Installation Manager
– Wizard assisted configuration of your server hardware and disk arrays
– Wizard assisted installation of all leading server operating systems
To Next Page
Loading...
