Media Wizard” in chapter 6 under Industry Standard Servers -
Software - ServerView Suite - Out-Of-Band Management on the Fujitsu
manuals server.
6.3.3 Configuring the onboard SATA controller
A SATA controller is integrated on the system board. You can configure the
onboard controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User’s
Guide" (on the Fujitsu manuals server under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software)
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI SAS / SCSI RAID Controllers).
I Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the global market).
http://jp.fujitsu.com/platform/server/primergy/downloads/ (for the Japanese
market).
I In the system BIOS the SATA Mode can be configured as "AHCI Mode"
(default), "RAID Mode" or "Disabled".
6.3.4 Configuring the SAS/SATA RAID controller
The server blade has a SAS/SATA RAID controller with "MegaRAID
functionality". You can configure the SAS/SATA RAID controller either before or
during installation with the ServerView Installation Manager. Using the
ServerView Installation Manager is recommended.
I A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User’s
Guide" (on the Fujitsu manuals server under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software).
To Next Page
Loading...
