Fujitsu Primergy BX2560 M1 - Page 8

Operating Manual BX2560 M1
Contents
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 49
6.1 Control and display elements . . . . . . . . . . . . . . . . . 49
6.2 Switching the Server Blade on and off . . . . . . . . . . . . . 54
6.3 Configuring the Server Blade . . . . . . . . . . . . . . . . . . 55
6.3.1 Preparing for local installation . . . . . . . . . . . . . . . . . . 55
6.3.2 Preparation for remote installation to use Advanced Video
Redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.3.3 Configuring the onboard SATA controller . . . . . . . . . . . . . 58
6.3.4 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 58
6.3.5 Configuring the onboard CNA controller . . . . . . . . . . . . . 59
6.3.6 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 59
6.3.7 Configuring the server and installing the operating system
without ServerView Installation Manager . . . . . . . . . . . . . 61
6.4 Cleaning the Server Blade . . . . . . . . . . . . . . . . . . . 62
7 Property and data protection . . . . . . . . . . . . . . . . . . 63
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 63
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 65
8.1 Server switches itself off . . . . . . . . . . . . . . . . . . . . 65
8.2 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 65
8.3 Flickering stripes on monitor screen . . . . . . . . . . . . . 66
8.4 No screen display or display drifts . . . . . . . . . . . . . . . 67
8.5 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 67
8.6 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 67
8.7 Hard disk drive error messages at system boot . . . . . . . 68
8.8 Added drive reported as defective . . . . . . . . . . . . . . . 68
8.9 Error message on screen . . . . . . . . . . . . . . . . . . . . 68