EasyManua.ls Logo

Fujitsu PRIMERGY BX900 S1 - Back of System; Control and Display Elements on the Management Blade

Fujitsu PRIMERGY BX900 S1
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BX900 S1 Operating Manual 63
Installation and operation
5.1.2 Back of system
5.1.2.1 Control and display elements on the management blade
Figure 15: Control and display elements on the management blade
1 Status indicator (yellow)
Lights up when the management blade is active (master)
Blinks when the management blade is defective.
Is not lit when the management blade is not active (slave)
2 LAN activity indicator (service LAN connection)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes orange when a LAN transfer is in progress.
3 LAN transfer-rate indicator (service LAN port)
Lights up green for a LAN transfer rate of 100 Mbit/s.
Does not light up for a LAN transfer rate of 10 Mbit/s.
12 3 45 6 78910 11

Table of Contents

Related product manuals