To Next Page
A
Amy BrownJul 30, 2025
What to do if both fans failed on Fujitsu Server?
- WWilliam BeckerJul 30, 2025
If both fans have failed in your Fujitsu Server, the fan module must be replaced.
What to do if both fans failed on Fujitsu Server?
If both fans have failed in your Fujitsu Server, the fan module must be replaced.
What to do if one fan failed on Fujitsu PRIMERGY S60 Server?
If one fan has failed in your Fujitsu Server, it indicates that the fan module must be replaced.
Covers essential safety instructions for operating the storage subsystem and handling components.
Explains the function of the three operating status LEDs (power, cooling, server management).
Describes the HDD READY and HDD STATUS LEDs for each hard disk drive.
Explains the fault and operating status LEDs for each power supply unit.
Describes the two power supply units, their redundancy, and the procedure for replacing one.
Details the procedure for installing and removing the fan module in both floorstand and rack models.
Covers safe handling, installation, removal, and hot-swapping of HDD modules.
Provides instructions and cautions for installing and removing the FFx-RAID controller module.
Covers unpacking, setting up floorstand, and preparing rack mounting.
Explains how to turn the storage subsystem on and off, and the correct power-on sequence.
Offers solutions for common issues like power, cooling, server management, and system startup.
General