62 U41221-J-Z156-1-74
Unpacking the Storage Subsystem Installation
10.2 Unpacking the Storage Subsystem
V CAUTION!
Please note the safety instructions in chapter “Important Notes” on
page 7.
If you need to lift or transport the storage subsystem, ask someone to
help you.
You should retain the original packaging of the storage subsystem for possible
further transport.
Ê Unpack all the individual parts.
Ê Check the contents of the package for visible transport damage.
Ê Check whether the delivery matches the information given on the delivery
note.
Ê Check whether the first page of the guarantee booklet has been completed
in full.
If you find transport damage or inconsistencies between the contents of the
package and the delivery note, inform your supplier immediately!
10.3 Setting Up the Floorstand Model
Position the storage subsystem at the intended location.
Note the following:
– The device must be protected against direct sunlight.
– The required minimum distances for operation and maintenance areas must
be adhered to.
– In order to connect the server, the rear of the storage subsystem must be
accessible.
– The mains plug must be accessible easily and safely.
– To ensure sufficient ventilation of the storage subsystem, a minimum
clearance of 200 mm must be provided at the front and rear of the storage
subsystem.
To Next Page
Loading...
Need help?
General