Need help?Do you have a question about the Fujitsu PRIMERGY RX300 S6 and is the answer not in the manual?
General| Tcase | 77.6 °C |
|---|---|
| Bus type | QPI |
| Stepping | B1 |
| FSB Parity | No |
| Processor code | SLBVB |
| Processor cache | 12 MB |
| Processor cores | 4 |
| Processor model | E5630 |
| System bus rate | 5.86 GT/s |
| Processor series | Intel Xeon 5600 Series |
| Processor socket | Socket B (LGA 1366) |
| Processor threads | 8 |
| Processor codename | Westmere EP |
| Motherboard chipset | - |
| Number of QPI links | 2 |
| Processor frequency | 2.53 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 32 nm |
| Processor manufacturer | Intel |
| Processor package size | 42.5 X 45 mm |
| Processor front side bus | - MHz |
| Processor boost frequency | 2.8 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| Supported instruction sets | SSE4.2 |
| Thermal Design Power (TDP) | 80 W |
| Number of processors installed | 1 |
| CPU multiplier (bus/core ratio) | 19 |
| Physical Address Extension (PAE) | 40 bit |
| Memory types supported by processor | DDR3-SDRAM |
| Memory channels supported by processor | Triple |
| Memory clock speeds supported by processor | 800, 1066 MHz |
| Memory bandwidth supported by processor (max) | 25.6 GB/s |
| Maximum internal memory supported by processor | 288 GB |
| HDD size | 2.5 \ |
| RAID levels | 5, 6 |
| Optical drive type | DVD Super Multi |
| Total storage capacity | 292 GB |
| Maximum storage capacity | - TB |
| Memory slots | 3x DIMM |
| Internal memory | 12 GB |
| Maximum internal memory | 192 GB |
| Memory layout (slots x size) | 3 x 4 GB |
| Networking features | Gigabit Ethernet |
| PS/2 ports quantity | 0 |
| USB 2.0 ports quantity | 10 |
| Power supply | 504 W |
| Power requirements | 100 - 240V, 47 - 63 Hz |
| Power consumption (typical) | 800 W |
| Noise level | 45 dB |
| Operating system installed | Windows Server 2008 |
| Compatible operating systems | Windows Server 2008/2008 R2/200310 - 35 |
| Operating temperature (T-T) | 10 - 35 °C |
| Sustainability certificates | ENERGY STAR |
| Certification | RoHS, WEEE, CB |
| Chassis type | Rack (1U) |
| PCI Express x4 slots | 5 |
| Processor ARK ID | 47924 |
| Intel® Turbo Boost Technology | 1.0 |
Weight and Dimensions| Depth | 445 mm |
|---|---|
| Width | 482.6 mm |
| Height | 85.9 mm |
Overview of the server's purpose, intended applications, and user base.
Listing of related manuals and resources for comprehensive product information.
Details on upgrading and modifying the server with new hardware options.
Explanation of symbols, formatting, and terminology used in the manual.
Crucial safety precautions to follow before powering on the server.
Guidelines for safe installation, handling, and ongoing operation of the server.
Specific safety advice for handling and replacing batteries within the server.
Safe procedures for using optical drives and handling CDs, DVDs, and BDs.
Information on laser safety for optical drives and precautions for electrostatic discharge.
Step-by-step guide to safely detach the server from its rack mounting.
Instructions on how to access the server's internal components by opening the cover.
Procedures for removing key internal parts like the air duct and fan box.
Guide on how to detach the power supply cage from the server.
Rules and guidelines for correctly installing memory modules in available slots.
Detailed steps for adding or replacing main memory modules in the server.
Procedure for installing an additional processor for dual-CPU configurations.
Instructions for removing an existing processor and installing a new one.
Steps for removing and reinstalling the processor heat sink assembly.
Guide for installing the Local Service Panel or Local Service Display.
Procedure for installing a slimline optical drive into the server bay.
Steps for installing USB tape drives and USB RDX drives.
Instructions for inserting expansion cards into PCI slots.
Procedure for replacing or upgrading the SAS/SATA RAID controller.
Steps for installing the BBU for RAID controller cache protection.
Procedure for attaching T-handles to the server's front cover for easier handling.
Guide for installing a front-panel video output connector.
Steps for installing the TPM module for enhanced security.
Procedure for installing the USB Flash Module for boot or storage.
Instructions for putting the fan box back into place.
Steps for reattaching the power supply cage and its modules.
Guide on how to put the air duct back into the server.
Procedure for reassembling and securing the server's outer cover.
Detailed steps for mounting the server into a rack cabinet.
A comprehensive list of all cables used in the server, with part numbers.
Diagrams illustrating cable connections for various drive configurations.
Diagram showing the layout of internal components and their interconnections.
To Next Page