Fujitsu PRIMERGY RX300 S6 - Installing LSP or LSD Module

56 Options Guide RX300 S6
Accessible drives and LSP/LSD
7.1 Installing LSP or LSD
The ServerView Local Service Panel (LSP) and ServerView Local Service
Display (LSD) are optional extra modules for PRIMERGY series servers. The
display field allows you to read status reports directly on the server. These
status reports provide you with information about the system and inform you of
hardware errors (e.g. fan failure or excess voltage at the CPU).
The ServerView Local Service Panel or ServerView Local Service Display can
be pulled out like a drawer. You can also swing the display field downward.
Figure 25: ServerView Local Service Display and ServerView Local Service Panel
The ServerView Local Service Panel or ServerView Local Service Display can
be installed in the empty 3.5"/0.5" bay.
I The installation of the ServerView Local Service Display is depicted
below. The ServerView Local Service Panel is installed in the same way.
Ê Open the server (see section "Opening the server" on page 29).
Ê Remove the fan box (see section "Removing the fan box" on page 31).