RX300 S6 Options Guide 95
Expansion cards and BBU
8.3 Installing a BBU
V CAUTION!
● Do not connect the cable using excessive force, the connector is
weak.
● Follow the safety instructions in the chapter "Safety instructions" on
page 19.
Ê Open the server as described in section "Opening the server" on page 29.
Ê Remove the air duct as described in the section "Removing the air duct" on
page 30
Preparing a BBU module (for iBBU07)
Figure 71: Connecting the cable from the battery to the board
Ê Connect the cable from the battery to the board.
To Next Page
Loading...
