EasyManua.ls Logo

Fujitsu PRIMERGY RX300 S6 - Installing USB Tape and RDX Drives

Fujitsu PRIMERGY RX300 S6
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66 Options Guide RX300 S6
Accessible drives and LSP/LSD
7.3 USB tape drive/USB RDX drive
I A USB drive can only be installed in the 6x 3.5" and 8x 2.5" hard disk
drive variant.
Ê Open the server as described in section "Opening the server" on page 29.
Ê Remove the fan box as described in section "Removing the fan box" on
page 31.
Ê Remove the dummy covers or drives from the two upper slide-in modules
(see operating manual, section "CSS components").
7.3.1 Installing a USB drive in a 6x 3.5" variant
7.3.1.1 Installing a USB drive in a drive cage
Installing a USB tape drive in a drive cage
I The USB tape drive and USB RDX drive are installed in the USB drive
module using the same method.
Figure 36: USB drive cage

Related product manuals