Need help?Do you have a question about the Fujitsu PRIMERGY RX600 S6 and is the answer not in the manual?
General| Number of Processors | Up to 4 |
|---|---|
| Chipset | Intel 7500 series |
| Memory | Up to 512 GB DDR3 |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Network Interface | 2 x Gigabit Ethernet |
| Power Supply | Redundant hot-plug power supplies |
| Operating System Support | Windows Server, Linux, VMware |
Defines the manual's purpose, content, and intended audience for server installation and operation.
Lists all related documents and resources available for the PRIMERGY RX600 S6 server.
Highlights important features like Customer Self Service (CSS), system board, storage, and management capabilities.
Provides a step-by-step overview for installing the PRIMERGY RX600 S6 server.
Provides essential safety guidelines for handling and operating the server.
Safety guidelines for before server startup and during installation.
Covers safety procedures and disposal methods for batteries used in the server.
Instructions for the safe use and handling of CDs, DVDs, and BDs with the optical drive.
Guidelines for safely handling components sensitive to electrostatic discharge.
Information on CE conformity, FCC compliance, and environmental standards.
Safety precautions and guidelines for transporting the server.
Important safety considerations when installing the server into a rack.
Information on environmentally friendly design, energy saving, and equipment disposal.
Step-by-step guide to safely unpack the server and its components.
Specifies requirements for compatible rack systems for server installation.
Instructions for physically installing the server into a rack system.
Information on connecting various external devices to the server.
Details on power subsystem requirements and connecting the server to electrical power.
General guidelines and safety precautions for connecting and disconnecting server cables.
Details on server front panel buttons, LEDs, ID card, and indicators.
Explains indicators and connectors located on the rear panel of the server.
Procedures and options for powering the server on, off, and system restart.
Guides for configuring the server and installing the operating system using ServerView tools.
Instructions for safely cleaning the server and its peripherals.
Describes mechanical access protection features for the server.
Details on using BIOS Setup for data protection and user/administrator passwords.
Troubleshooting steps for power indicators, blank screens, and display artifacts.
Resolving issues related to drive detection, defective drives, and system date/time.
Guidance on interpreting and resolving on-screen error messages.
Overview of hot-plug components and procedures for their replacement or addition.
Detailed steps for replacing or adding hot-plug power supply units.
Instructions for identifying and replacing defective or adding new hot-plug fans.
Guidelines for handling, installing, and removing hot-plug HDD/SSD modules.
Procedures for managing hot-plug expansion cards, including removal and installation.
Steps for identifying, removing, and installing memory modules and boards.
Procedures for replacing non-hot-plug components like expansion cards and transceivers.
Safe procedures for opening and closing the server chassis for component access.
Technical specifications for system board, processor, and memory configuration.
Details on available server interfaces, controllers, and slot configurations.
Specifications for drive bays, general system info, and operating panel details.
Provides server dimensions, weight, and environmental operating conditions.
Details on power supply configuration, voltage, frequency, and consumption.
To Next Page
