Fujitsu PRIMERGY RX600 S6 - ID Indicator and Button

RX600 S6 Operating Manual 65
Starting up and operation
5.1.2.2 ID indicator and button
Figure 11: ID indicator
1 ID indicator (blue)
Lights up blue when the system has been selected by pressing the ID
button. To deactivate, press the ID button again.
The ID indicator can also be activated via the ServerView Operations
Manager and the iRMC S2 Web interface and its status reported to the
ServerView Operations Manager and the iRMC S2.
2 ID button
0
/