Fujitsu PRIMERGY RX600 S6 - Installing a New Memory Module; Reinstalling the Memory Board in Question

RX600 S6 Operating Manual 113
CSS components
8.1.5.4 Installing a new memory module
V CAUTION!
Observe the safety information concerning memory modules in section
"Removing a defective memory module" on page 111.
Figure 31: Installing a memory module
Ê Carefully press the memory module into the slot (1) until the fastening tabs
on both sides of it engage (2).
8.1.5.5 Reinstalling the memory board in question
Figure 32: Installing a memory board
Ê Plug the memory board in such a way into the respective slot that it will be
guided within the guiding rails on both sides. Move the memory board as far
as it will go into its slot (1).
/
0
0
0 0
/