62 Operating Manual RX600 S6
Starting up and operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-11939-001.fm
5.1.1.4 Indicators on the hot-plug HDD/SSD modules
Figure 9: Indicators on a hot-plug HDD/SSDmodule
If a hard disk drive or solid state disk continuously indicates an error, the drive
should be replaced as soon as possible. This can be done during operation (see
"Hot-plug HDD/SSD modules" on page 94).
1 HDD/SSD BUSY (green)
– Lights up: HDD/SSD in active phase (drive active, drive being
accessed)
– Does not light: HDD/SSD inactive (drive inactive)
2 HDD/SSD FAULT (orange)
– Does not light: no HDD/SSD error
– Lights up: HDD/SSD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD/SSD module is
not correctly inserted)
– Slow flashing: HDD/SSD Rebuild (the data is being restored after
changing a drive)
1 2
To Next Page
Loading...
