Fujitsu PRIMERGY RX600 S6 - Closing the Server

RX600 S6 Operating Manual 127
CSS components
8.3.2 Closing the server
V CAUTION!
The housing cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
Figure 45: Placing the housing cover
– Place the housing cover onto the server such that it projects approx. 2 cm at
the back (see circle in figure above).
– Push the housing cover as far as possible in the direction of the arrow.
– Fasten the little screw (see circle in figure 44) on the cover.