Need help?Do you have a question about the Fujitsu PRIMERGY RX200 S5 and is the answer not in the manual?
General| Tcase | 76 °C |
|---|---|
| Bus type | QPI |
| Stepping | D0 |
| FSB Parity | No |
| Processor code | SLBF9 |
| Processor cache | 4 MB |
| Processor cores | 4 |
| Processor model | E5504 |
| System bus rate | 4.8 GT/s |
| Processor series | Intel Xeon 5500 Series |
| Processor socket | Socket B (LGA 1366) |
| Processor codename | Nehalem EP |
| Motherboard chipset | Intel® 5500 |
| Number of QPI links | 2 |
| Processor frequency | 2 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 45 nm |
| Processor system type | DP |
| Processor manufacturer | Intel |
| Processor package size | 42.5 x 45 mm |
| Processor front side bus | - MHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| Thermal Design Power (TDP) | 80 W |
| Number of processors installed | 1 |
| CPU multiplier (bus/core ratio) | 15 |
| Memory types supported by processor | DDR3-SDRAM |
| Memory channels supported by processor | Triple |
| Memory clock speeds supported by processor | 800 MHz |
| Memory bandwidth supported by processor (max) | 19.2 GB/s |
| Maximum internal memory supported by processor | 144 GB |
| HDD size | 2.5 \ |
| Total storage capacity | 0 GB |
| Internal memory | 4 GB |
| Memory clock speed | 1066 MHz |
| Maximum internal memory | 96 GB |
| Memory layout (slots x size) | 2 x 2 GB |
| Networking features | Gigabit Ethernet |
| Expansion slots | 1x PCI-Express 2 x4 2x PCI-Express 2 x8 |
| PS/2 ports quantity | 0 |
| USB 2.0 ports quantity | 7 |
| Ethernet LAN (RJ-45) ports | 3 |
| Power supply | 459 W |
| Power requirements | 100 - 127 V / 200 - 240 V |
| Power supply input frequency | 50 - 60 Hz |
| Compatible operating systems | Microsoft Windows Server 2008 Microsoft Windows Server 2003 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Citrix XenServer VMware Infrastructure VMware vSphere 4.0 |
| Chassis type | Rack (1U) |
| Operating temperature (T-T) | 15 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Certification | CE, CB, RoHS, WEEE |
| Processor ARK ID | 40711 |
Weight and Dimensions| Depth | 765 mm |
|---|---|
| Width | 431 mm |
| Height | 43 mm |
Describes the manual's purpose and audience for server operation.
Lists other documents providing additional information about the PRIMERGY RX200 S5.
Details key features of the PRIMERGY RX200 S5 server, including CSS and system board capabilities.
Explains symbols, formatting, and warnings used throughout the manual.
Presents electrical specifications and compliance with various regulations and standards.
Provides critical safety guidelines for operating and servicing the server, including handling precautions.
Information regarding ENERGY STAR compliance and its impact on energy consumption.
States compliance with EC directives for electromagnetic compatibility and low voltage.
Guidelines for safely transporting the server, emphasizing proper packaging and handling.
Specific precautions and requirements for installing the server into a rack.
Details on environmentally friendly design, energy saving, and disposal of packaging and consumables.
Instructions for safely removing the server from its packaging.
Guides on how to mount and dismount the server within a rack system.
Details on connecting external devices like keyboards, monitors, and USB drives to the server.
Procedures for connecting the server's power supply units to the electrical mains.
Important guidelines and precautions for connecting and disconnecting various cables.
Overview of the server's front and rear controls and status indicators.
Procedures for powering the server on, off, and alternative power control methods.
Guidance on configuring the server and installing the operating system.
Instructions for safely cleaning the server's exterior components.
Explains how to use BIOS setup options to enhance system and data security.
Addresses common problems like power indicators, screen display, boot issues, and error messages.
Covers procedures for handling and replacing hot-plug components like power supplies and HDDs.
Details the process for replacing non-hot-plug components such as memory modules and expansion cards.
To Next Page
