RX200 S5 Operating Manual 23
2 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter "Important information" on page 25.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 38).
Ê The server includes loose parts. Keep these parts in a safe place. They are
designed to be used for installing optional components at a later time.
Ê Transport the server to the place where you want to set it up.
Ê Make sure that you have all necessary manuals (see "Documentation
overview" on page 8); print out the PDF files if required.
Ê Fit the server in the rack (see section "Installing/removing the server in/from
the rack" on page 39).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 50 and "Notes on connecting/disconnecting cables" on
page 54.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 52).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Controls and indicators" on page 55).
To Next Page
Loading...
